The tempered glass design and focus on organization brought a change to the PC gaming world a few years ago.
The cases come with fans pre-installed along with LED lighting and cable management solutions so the engineering towards keeping temperatures cool and maximizing airflow are already in place out of the box. The power supply will sit underneath an encasing along with any full size hard drives you may have.
Rather than building with new equipment, we transferred some older equipment.
What’s the Difference Between H Series “Non-i” and “i” Cases?
The accessories you need for installing part such as screws and cable attachments all sit in the encasing where the power supply will sit rather than in the packaging. We were easily able to lay our Asus ZE motherboard into the Hi, but not before having to attach a new back bracket for the Kraken X62 Liquid Cooler.
Cable management already had the necessary front panel inputs and fan connectors pre-mounted and in place. There is a designed cable management stand that is seen on the right hand side of the case that adds to the look of the Hi. Cables can also be routed from both under and over the motherboard along with the right-hand side. This helps eliminate any cabling crossing the board and will show off the motherboard you bought.
Additionally, builders have access to vertical mounted GPUs in the case. All of this organization was engineered ahead of time and prepared for a nearly plug-n-play solution. The fans were pre-installed with three in the front and one in the back, but the fans ultimately do lack RGB.
The airflow design is for bringing air into the case and pushed out of the top. While there are no fans on the top by default. The exterior design of the case is comprised of SCGG Steel and is extremely easy to remove the panels, which is a big perk. While the front cover of the case is solid, PC people will wonder about the airflow. Down both sides of the front of the case are air holes to suck in air and the same goes for the top of the case.
Now the fans can be rerouted if someone would prefer, but this has been engineered for the best cooling efforts possible. Every interior fan also includes an air filter, but a close eye will need to be kept on these areas to ensure there is no dust buildup.
The Hi does include a compartment that is designed to fit a radiator. The Kraken X62 we were sent did pose some concerns for air.
The compartment can be removed and is designed to have fans on one side and the radiator on the other. Placement was somewhat of an issue due to the tubes that attached to the pump. Depending on the board and where the rear fan sits, space can be an issue. NZXT also offers the three-fan X72, which could be an issue to fit at the top.
There is space at the bottom. The other lighting sits behind the cable management bar as it helps illuminate the interior without blinding you. The Kraken X62 pump that sits on the processor brings the case to life. The NZXT Hi works amazing for new builds, but there are a few quirks if your hardware is outdated. This would also prohibit the intended air flow design.The USB-C 3.
The glass side panel is the most visible and most significant change. One of our complaints with the H was that the steel side panel came off with a single spring-loaded push button, but the glass side panel required removing four thumbscrews the old fashioned way. In the H, the side panel hooks in at the bottom and snaps into plastic sockets at the top, and is then locked down by a single captive thumbscrew.
The only flaw we noticed was that the decorative purple plastic tab had fallen off, probably due to heat during shipping.
The first thing we did notice were some small cable tie points on the back of the cable management bar, so that some LED or fan cables can be routed invisibly all the way up to the glass side panel. Like the H Elite, the elaborate spring-loaded SSD sleds of the previous generation have been replaced with simpler one-piece plastic trays that are cheaper to produce.
The 3. In the H there were two stacked single-drive bays that could be removed individually and were held in by captive thumbscrews. In fact, since the cage now uses the same rail spacing as 3. Other notes: despite renders which show them, there are no longer any removable cable channels or velcro straps underneath the SSD sleds behind the motherboard tray, just some cable tie points.
The shape of this part of the chassis is slightly different than it appears on the product page and there is no longer space to fit these cable channels, which is fine, the tie points are plenty. The plastic hooks that hold the steel side panel in place are shaped differently but function identically other than perhaps being a bit stiffer when pushing the steel panel into place.
First, the top and front panels are an enormous pain to remove. The rear fan slot supports mm or mm fans AND the fans can be moved up or down 6cm or 4cm respectively; unfortunately, having both of these features means that the mm rails block a good part of the stock mm fan. As for the velcro straps, the two at the edge of the case are oriented so that the tail ends stick out with no convenient place to tuck them.
Prior to load testing, we collect idle temperature results for ten minutes to determine the unloaded cooling performance of a case's fans and air channels. Thermal benchmarking is conducted for seconds 23 minutesa period we've determined sufficient for achieving equilibrium.
The over-time data is aggregated and will occasionally be compiled into charts, if interesting or relevant. The equilibrium performance is averaged to create the below charts.
Testing is completely automated using in-house scripting, and executes with perfect accuracy on every run. The torture workload got the CPU to The old Hi averaged As compared to the rest of the cases on the chart, The original plan was apparently to have two strips preinstalled, but this way the user can decide where to place the second one.
Do not use low-noise adapters. As always, NZXT has taken particular care with cable management. The bar sticks closely to the shroud and interior of the case, except where it angles outwards at the top to allow room for the smart device--maybe a little too closely.
The steel side panel is ridiculously easy to open in a good way. This is partly due to the good cable management, which makes it unnecessary to lock down every side of the panel to compress rogue cables.
Unlike the S Elite, which is basically an S with a glass panel added, the Hi has been built around tempered glass from the start. We thought the Elite was a well-priced upgrade when we reviewed itbut criticized it for having barely any front intake thanks to a side panel that extended all the way to the front of the case.
Then, stick the front steel panel onto an underlying frame with mesh, and cut a grill into the side of the new front panel. The Hi has those improvements.
The front and top panels are still solid sheets of steel, but there are strips of ventilation on each side. NZXT is serious about cooling this case: there are four fans included, three mm intakes and one mm exhaust, and the smart device has capacity to plug in five more nine total, divided between three channels. The PSU shroud is heavily vented. Whereas the S had some angled vents cut into the shroud to scoop air from the lowest intake fan into the case, the Hi simply has a big hole, large enough to allow air to flow freely into the interior of the case rather than the PSU which can cool itself just fine.
In addition, the whole surface of the shroud is perforated, which serves the dual purpose of allowing more air to move through the bottom of the case and providing mounting points for the SSD trays.
There are three 2. Two 3. There are no external fan or lighting controls built into the case, which means functionality is dependent on either using CAM or plugging everything into the motherboard and ignoring the smart device. The login prompt on the smart device tab logging in is necessary for adaptive noise reduction but not lighting or fan control is placeholder text in the publicly available non-beta version we used for testing, and the app gives the overall impression of being a work in progress.
In reality, the Smart Device is a tragic addition to an otherwise phenomenal case. NZXT has taken the core competency of a case company -- making a box to put a computer in -- and has overreached in desperate attempt to further integrate the controversial CAM software into yet more devices.
It does not work outside of this range.
Above: It started making some actual progress once SystemInfoHelper pitched in. This is on a K, mind you. Above: CAM is running an " idle " test.
Instead, we used our normal testing approach, bagging the smart device and writing it off as a poorly implemented, overreaching attempt at doing something genuinely unique; instead, NZXT should have focused on what it does well, which is nearly every single other feature of this case.
We tested using our new Skylake case test bench, detailed in the table below. Conducting thermal tests requires careful measurement of temperatures in the surrounding environment. We control for ambient by constantly measuring temperatures with thermocouples and laser readers. We then produce charts using a Delta T emperature over Ambient value.June 5, Each includes builder-friendly features like generous airflow, removable brackets for mounting fans and radiators, a patent-pending cable management system, signature PSU shroud and cable management bar, and a stunning tempered glass panel.
The H Series cases are available in four color combinations white, black, blue, and red to match your taste, and its elegant all-steel construction is shared across all sizes. Perfect when you want a small-footprint ATX case without sacrificing features. A removable radiator mounting bracket, flush tempered glass window, and multiple fan filters are just some of the amenities.
Looking to build a MicroATX system, but frustrated with your choices for a great case? Look no further than the H and Hi. The full tempered glass showcases your mini-ITX build with glorious clarity and the front mounting bracket allows installation of radiators up to mm. Are your ready for your new H Series case?
Let us know which form factor and color is your favorite in the comments below and learn more at nzxt.
Reply 0.With a USB 3. The clean, modern design, iconic cable management bar, and uninterrupted tempered-glass side panel showcase your stunning build. Cable management can take more time than assembling a system. Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive.
We use them to give you the best experience. If you continue using our website, we'll assume that you are happy to receive all cookies on this website. See product features. Find Retailer. Specification Downloads Returns.
Do not use low-noise adapters. Returns are not allowed beyond 30 days of the purchase date. The NZXT. Refunds will be credited to the original method of payment. To initiate a return, simply submit a request at support nzxt. If you are purchasing any items that are discontinued, please be aware that we may no longer carry parts for those items. We apologize for the inconvenience.
They will come as is. If you have issues upon receiving your case, please contact us as soon as possible. Thank you for your rating! You just added. Sub Item :.With a USB 3. The clean, modern design, iconic cable management bar, and uninterrupted tempered-glass side panel showcase your stunning build. Cable management can take more time than assembling a system. Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive.
We use them to give you the best experience. If you continue using our website, we'll assume that you are happy to receive all cookies on this website.
Mid-Tower Case with Tempered Glass. See product features. Find Retailer. Specification Downloads Returns. Returns are not allowed beyond 30 days of the purchase date. The NZXT. Refunds will be credited to the original method of payment. To initiate a return, simply submit a request at support nzxt. If you are purchasing any items that are discontinued, please be aware that we may no longer carry parts for those items.
We apologize for the inconvenience. They will come as is.Timelapse of AMD 3900X, RTX 2080 TI, NZXT H710i
If you have issues upon receiving your case, please contact us as soon as possible. Thank you for your rating! You just added. Sub Item :. Sign in with Google. Sign in with Facebook. Sign In Here. Sign Up with Google. Sign Up with Facebook. Continue Learn More.There will be six new models in the refreshed H-Series. The H, Hi, H, Hi, H, and Hi further the legacy of the original H-Series by keeping features beloved by builders while adding new ones. We added improvements to the latest line of H Series to make sure that PC Builders will have the best tools available to them to make simple, modern, and beautiful builds.
The all-new H Series is available in matte black, matte white, and matte black and red. This new iteration of the H-series will include flush tempered glass mounting, allowing it to be installed with a single captive thumb screw for easier access to the interior of the case, as well as improved SSD trays. In addition to several improvements that allow for a smarter building experience, the new H-series will be equipped with a front-panel USB C connector supporting high-speed USB 3.
With a USB 3. The clean, modern design, iconic cable management bar, and uninterrupted tempered-glass side panel showcase your stunning build. Cable management can take more time than assembling a system. Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive and easy. Show off your graphics card with a built-in mounting bracket for installing your GPU vertically. CPU-Z download v1. Download GeForce Netherwind Senior Member Posts: Joined: Click here to post a comment for this news story on the message forum.